enx magazine
Phone: 1-818-550-7547 Toll Free: 1-800-850-4949 Fax: 1-818-550-7527
The #1 Sourcing Publication in the Document Imaging Industry
|
Code |
Sensor or Switch Tested |
Value meanings |
|
01-01 |
Front Door Interlock Switch |
0 = Door Open |
|
01-05 |
Fuser Exit Door Interlock Switch |
0 = Door Open |
|
01-06 |
Top Cover Interlock Switch |
0 = Door Open |
|
02-02 |
Keyboard Test |
|
|
07-01 |
Fuser and Xerographic Module Interlock |
0 = Module is out |
|
07-02 |
Cutter Drawer Interlock Switch |
0 = Drawer Open |
|
07-07 |
Roll 1 Lead Edge Sensor |
0 = Actuated |
|
07-08 |
Roll 2 Lead Edge Sensor |
0 = Actuated |
|
07-09 |
Roll 3 Lead Edge Sensor |
0 = Actuated |
|
07-10 |
Roll 1 Motion Sensor |
Should alternate between 0 & 1 as the motion of the media is detected. |
|
07-11 |
Roll 2 Motion Sensor |
Should alternate between 0 & 1 |
|
07-12 |
Roll 3 Motion Sensor |
Should alternate between 0 & 1 |
|
07-13 |
Roll 1 Drawer Sensor |
0 = Drawer Open |
|
07-14 |
Roll 2 Drawer Sensor |
0 = Drawer Open |
|
07-15 |
Roll 3 Drawer Sensor |
0 = Drawer Open |
|
07-21 |
Cutter Home Sensor |
1 = Cutter is Home |
|
08-01 |
Media Feed Sensor |
0 = Media Sensed |
|
08-03 |
Media Registration Sensor |
0 = Media Sensed |
|
08-07 |
Media Exit Sensor |
1 = Media Sensed |
|
08-08 |
Stack Height Sensor (for cut sheet feeder) |
1 = Full |
|
09-01 |
Toner Cartridge Home Sensor |
0 = Cartridge is Home |
|
09-02 |
Drum Motor Stall Sensor |
0 = Stalled |
|
10-05 |
Fuser Jam Switch |
0 = Media Sensed |
Note that the fuser must be at the run temperature before making any voltage checks or operating diagnostics… this is to prevent damage to the fuser. (Cold fuser oil can be very viscous and will do some serious damage if you aren’t aware of this).
40,000 COPIES MAILED OUT EACH MONTH * FREE SUBSCRIPTION TO IMAGING INDUSTRY PROFESSIONALS * COMPANY & BUSINESS PROFILE MONTHLY FEATURES