enx magazine

10-32	Web Oil Rate (default = 100%, range is from 50 - 200)
10-33	Advance Oil Web (used to test the motor and also to tension the web properly when oil assembly is removed and reinstalled).
10-34	Estimate Oil Web life (estimate in print feet or meters).
10-60	Fuser Temp adjustment (bond media).
10-62	Fuser Temp (vellum media adjustment).
10-63	Fuser Temp (film media adjustment).
14-01	Loopback Test for Remote Access interface (0 = passed).
14-02	Loopback Test for Controller Status (0 = passed).
14-03	Loopback Test for Finisher Port (0 = passed).
14-04	ESS Communications Test.

4 = Adjust Image Density (higher number lightens copy) run the 09-06 code to tone up / tone down automatically after you adjust the image density.

5 = Illuminates the LED Image Bar for observation purposes (that's the thing which writes on the drum in this machine) You can stack code 09-70 to switch between two different test patterns to see that the lit LED’s change appropriately in pattern.

6 = Calibrates the Toner Control Sensor

7 = Humidity Sensor control point setting (>65% Relative Humidity… 1=yes, 2=no)

Now you have some basic tools to approach these machines somewhat comfortably. Have fun fixing stuff!

Britt works for The Parts Drop, a company whose primary business is providing parts, supplies and information for Xerox brand copiers, printers & faxes. You can find archived articles on the ENX website (www.enxmag.com). Also, you’ll find lots of other information on Xerox machines on the Parts Drop's website www.partsdrop.com .

Profile Xerox pg 1 pg2 pg3 pg4 pg5 pg6 Print Word Document

40,000 COPIES MAILED OUT EACH MONTH * FREE SUBSCRIPTION TO IMAGING INDUSTRY PROFESSIONALS * COMPANY & BUSINESS PROFILE MONTHLY FEATURES