Printer Tech Tips HP Color LaserJet CP6015, CM6030 and CM6040 MFP Product Series: Performing a Cold Reset or Initializing the Hard Disk Drive The service manual does not specify how to perform a cold reset or how to initialize a hard drive. Use the instructions below to complete these important technical processes NOTE: Performing a cold reset may return some of the printer settings back to factory defaults. Some of these settings may include: • Configuration/Network Settings • JDI settings • Customer Paper Size/type settings Initialize the hard disk drive CP6015 single function series 1. Turn on the printer, wait for the memory count, and then DURING the memory count press and hold the MENU button until the three status LEDs are illuminated. 2. Release the MENU button. 3. Press the (O) button. The message INITIALIZE DISKS displays on the control panel. 4. Press the down arrow (q) button to select the menu item. The printer will initialize the disk and then continue with the boot sequence. CM6030/CM6040 MFP series 1. Turn on the MFP, wait for the memory count, and then DURING the memory count press and hold the START button until the three status LEDs are illuminated. 2. Release the START button. 3. Presses the 5 button one time until INITIALIZE DISK is displayed and then press the 6 button one time. The product will initialize the disk and then continue with the boot sequence. Perform a Cold Reset CP6015 single function series 1. Turn on the printer, wait for the memory count, and then DURING the memory count press and hold the Green Check button until the three status LEDs are illuminated. 2. Release the green check ( P) button and use the down arrow (q ) button to scroll to COLD RESET. 3. Press the green check ( P) button to select the menu item. The printer will reset. CP6030 and CP6040 MFP series 1. Turn on the product, wait for the memory count, and then DURING the memory count press and hold the 6 button until the three status LEDs are illuminated. 2. Release the 6 button. 3. Presses the 3 button until COLD RESET is displayed and then press the 6 button one time. The product will reset. *This Tech Tip is contributed by Laser Pros. Visit their website www.LaserPros.com or email any question to marketing@laserpros.com.